All types of jewellery, precious metals and gemstone are exposed to wear and possible damage. All jewellery requires periodic examination, replacement of lost or chipped gemstones, refurbishing, and other forms of repair or replacement of worn and damaged parts. Areas that receive the most wear include hinges and clasps, prongs and settings, ring shanks, bracelet links and chains.

At Arman’s Jewellers, we offer uncompromising on-site reconditioning and repair services on your most treasured pieces. Our expertise combines over 70 years of experience restoring, and repairing all types of jewellery. Our master goldsmith will provide you with fast, professional and high quality service at affordable prices.

For top-quality jewellery repair and refurbishing, call us or contact us online. We are here to help.

Ring Re-sizing

Is your ring too tight or too loose? Do you have issues moving your ring across the knuckle? Is the ring stuck to your finger?

Arman’s Jewellery Repairs can help you with all of these issues for silver, gold and platinum rings. We can change the size of your ring to ensure it fits perfectly!

The process begins by measuring your ring size. We have more than 30 measuring rings, which help us find your finger size and know which ring would fit you best. Once this is complete, we get right to work to change the size of your ring to the newly discovered perfect one. Our procedures are very accurate to be certain the ring is exactly the size each customer prefers. Also, in the case that the ring is stuck to your finger, our safe procedure ensures the ring removal without any injury.

Our professional procedure also ensures that the resizing spot is well-hidden and almost impossibly to notice by the naked eye.

Visit our Kitchener-Waterloo jewellery store for a free estimate!

Back to Top

Prong Re-tipping | Claw Re-tipping

Have your diamonds or gemstones fallen off your ring? Has your ring started catching on your clothes? Are the prongs or claws worn out?

The above problems are usually caused due to the wear and tear of the prongs or claws which hold the stone on the ring. Arman’s Jewellery Repairs can help you with all of these issues!

The process begins with a close inspection of the prongs or claws to determine the extent to which they have been worn out. Most of the time we can rebuild the prongs or claws to their original conditions. On some rare cases, the prongs or claws may be worn out to such an degree that they may need to be entirely replaced. Whatever the situation calls for, we can return your ring to look like new again.

Come by our Kitchener-Waterloo jewellery store for a free inspection and estimate!

Back to Top

Shank Replacement

Has the shank on your ring worn to the extent where it is so thin that it may break? Is the shank cracked or broken already?

Arman’s Jewellery Repairs can replace the shank of all types of rings and help them back to their original conditions!

The process begins by cutting the off the current shank on the ring. We then build the new shank from scratch and customize it. Each ring asks for a particular width and thickness of a shank to ensure it fits perfectly. We create all shanks by melting the gold and shaping it to the desired width and thickness for a perfect fit. The finishing touches include polishing and cleaning the ring in an ultrasonic cleaner.

Our professional re-shanking procedure ensures the re-attachment spots are almost impossible to notice by the naked eye!

Stop by our Kitchener jewellery store for a free estimate!

Back to Top

Rhodium Plating

Are your white gold rings losing their original plating due to their wear and tear?

Arman’s Jewellery Repairs can make them look like new again!

The process begins with a thorough polish of the rings to remove all scratches and bring the surface back to its original condition. The rings are then cleaned using an electrolytic-cleaning solution to remove all dirt and debris from the ring. After this procedure all impurities are removed. The last step of the procedure is a rhodium bath, which applies a new bright, white finish to the ring and makes it look like brand new.

The entire procedure is done onsite, using state of the art equipment!

Visit our Kitchener-Waterloo jewellery store for more information!

Back to Top

Stone Setting or Replacement | Diamonds or Gemstones

Have you lost a diamond or a gemstone from your ring? Would you like a brand new look to your ring?

Arman’s Jewellery Repairs can solve such issues. Whether your stone has fallen out, or whether you would just like a new look, we offer a wide array of stones and stone settings to help you love your ring again!

We carry a large inventory of gemstones and diamonds of all shapes and sizes! A large stock gives us the opportunity to replace the stones very quickly, while you wait! In the rare cases where customers prefer unique stones, we can order them in. Our strong relationships with our manufacturers allows us to find the exact stone you like and have it delivered.

Our professional procedure also ensures that the resizing spot is well-hidden and almost impossibly to notice by the naked eye.

Visit our Kitchener-Waterloo jewellery store to see our inventory and talk to our goldsmith!

Back to Top

Ring Engraving

Would you like to have something special engraved on your ring?

Arman’s Jewellery Repairs offers several engraving techniques that can be applied to the inside or outside of the rings!

If there are any special quotes that have a special feeling in your heart, or if you would like to engrave your initials of someone dear to you, we can certainly help you!

Check out our Kitchener-Waterloo location to get a free estimate or discuss more details with our goldsmith!

Back to Top

Ring Polishing

Is your ring scratched? Does it look dirty, dull and old?

Arman’s Jewellery Repairs can retrieve it back to its original look!

The ring is initially polished and the scratches are removed. It is then cleaned in the ultrasonic cleaner and dried with a steamer to ensure that the stones are clean.

For more details, visit our Kitchener-Waterloo location to consult with our goldsmith!

Back to Top

Jewellery Redesign

Do you have any old broken jewellery? Does any of your sentimental jewellery wear to the extent that it cannot be used anymore?

Arman’s Jewellery Repairs can melt it and redesign it into a ring, bracelet, necklace, pendant or whatever you wish!

For more information, please visit our Custom Jewellery Design page or visit our Kitchener showroom to consult with our goldsmith!

Back to Top

Bracelet Polishing

Is your bracelet scratched? Does it look dirty, dull and old?

Arman’s Jewellery Repairs can retrieve it back to its original look!

The bracelet is initially polished and the scratches are removed. It is then cleaned in the ultrasonic cleaner and dried with a steamer to ensure that the bracelet is clean.

For more details, visit our Kitchener-Waterloo location and consult with our goldsmith!

Back to Top

Bracelet Re-sizing

Is your bracelet too tight or too loose?

At Arman’s Jewellers, we can determine your correct bracelet size and re-size your silver, gold and platinum bracelet to ensure it fits perfectly!

Our professional procedure also ensures that the resizing spot is well-hidden and almost impossibly to notice by the naked eye.

Visit our Kitchener jewellery store for a free estimate!

Back to Top

Bracelet Re-soldering

Did your bracelet happen to break?

At Arman’s Jewellers, we can re-solder your bracelet to its original state in just a few minutes.

Our professional procedure also ensures that the re-soldering spot is not visible by the naked eye.

Stop by our Kitchener-Waterloo jewellery store to have it fixed while you wait!

Back to Top

Bracelet Rhodium Plating

Is your white gold bracelet losing its original plating due to its wear and tear?

Arman’s Jewellery Repairs can make them look like new again!

The process begins with a thorough polish of the bracelet to remove all scratches and bring the surface back to its original condition. The bracelet is then cleaned using an electrolytic-cleaning solution to remove all dirt and debris from the bracelet. After this procedure all impurities are removed. The last step of the procedure is a rhodium bath, which applies a new bright, white finish to the bracelet and makes it look like brand new!

The entire procedure is done on site, using state of the art equipment!

Visit our Kitchener-Waterloo jewellery store for details!

Back to Top

Bracelet Engraving

Would you like to have something special engraved on your bracelet?

Arman’s Jewellery Repairs offers several engraving techniques that can be applied to the inside or outside of your bracelet!

If there are any special quotes that have a special feeling in your heart, or if you would like to engrave your initials of someone dear to you, we can certainly help you!

Check out our Kitchener-Waterloo location to get a free estimate or discuss more details with our goldsmith!

Back to Top

Stone Setting or Replacement | Diamonds or Gemstones

Have you lost a diamond or a gemstone from your earrings?

Arman’s Jewellery Repairs can solve issue for you. Whether your stone has fallen out, or whether you would just like a new look, we offer a wide array of stones and stone settings to help you love your earrings again!

We carry a large inventory of gemstones and diamonds of all shapes and sizes! A large stock gives us the opportunity to replace the stones very quickly, while you wait! In the rare cases where customers prefer unique stones, we can order them in. Our strong relationships with our manufacturers allows us to find the exact stone you like and have it delivered.

Our professional procedure also ensures that the resizing spot is well-hidden and almost impossibly to notice by the naked eye.

Visit our Kitchener-Waterloo store to see our inventory and consult with our goldsmith!

Back to Top

Earrings Re-soldering

Did your earrings happen to break?

At Arman’s Jewellers, we can re-solder your earrings to their original state in just a few minutes.

Our professional procedure also ensures that the re-soldering spot is not visible by the naked eye.

Stop by our Kitchener-Waterloo jewellery store to have them fixed while you wait!

Back to Top

Earrings Polishing

Have your earrings scratched? Do they look dirty, dull and old?

Arman’s Jewellery Repairs can retrieve them back to their original look!

The earrings are initially polished and the scratches are removed. They are then cleaned in the ultrasonic cleaner and dried with a steamer to ensure that the stones are clean.

For more details, visit our Kitchener-Waterloo location and discuss details with our goldsmith!

Back to Top

Earrings Rhodium Plating

Are your white gold earrings losing their original plating due to their wear and tear?

Arman’s Jewellery Repairs can make them look like new again!

The process begins with a thorough polish of the earrings to remove all scratches and bring the surface back to its original condition. The earrings are then cleaned using an electrolytic-cleaning solution to remove all dirt and debris from the ring. After this procedure all impurities are removed. The last step of the procedure is a rhodium bath, which applies a new bright, white finish to the earrings and make them look like brand new.

The entire procedure is done on site, using state of the art equipment!

Visit our Kitchener-Waterloo store for more information!

Back to Top

Pendant Engraving

Would you like to have something special engraved on your pendant?

Arman’s Jewellery Repairs offers several engraving techniques that can be applied to the inside or outside of the pendant!

If there are any special quotes that have a special feeling in your heart, or if you would like to engrave your initials of someone dear to you, we can certainly help you!

Check out our Kitchener-Waterloo store to get a free estimate or discuss more details with our goldsmith!

Back to Top

Necklace Clasp Fixing

Did the clasp on your necklace happen to break?

Arman’s Jewellery Repairs can fix or replace your clasp depending on your choice. If we have your clasp in stock, then this procedure can be done in a few minutes, while you wait! In the case that we do not have the clasp in stock, we can certainly order it in for you from one of our suppliers.

Visit our Kitchener-Waterloo store to get a free estimate and to discuss further details with our goldsmith!

Back to Top

Necklace Polishing

Is your necklace scratched? Does it look dirty, dull and old?

Arman’s Jewellery Repairs can retrieve it back to its original look!

The necklace is initially polished and the scratches are removed. It is then cleaned in the ultrasonic cleaner and dried with a steamer to ensure that the necklace is clean.

For more information, visit our Kitchener-Waterloo location to consult with our goldsmith!

Back to Top

Necklace Re-sizing

Is your necklace too tight or too loose?

At Arman’s Jewellers, we can determine your correct necklace size and re-size your silver, gold and platinum necklace to ensure it fits perfectly!

Our professional procedure also ensures that the resizing spot is not visible by the naked eye.

Visit our Kitchener-Waterloo jewellery store for a free estimate!

Back to Top

Necklace Re-soldering

Did your necklace happen to break?

At Arman’s Jewellers, we can re-solder your necklace to its original state in just a few minutes.

Our professional procedure also ensures that the re-soldering spot is not visible by the naked eye.

Stop by our Kitchener-Waterloo store to have it fixed while you wait!

Back to Top

Necklace Rhodium Plating

Is your white gold necklace losing its original plating due to its wear and tear?

Arman’s Jewellery Repairs can make them look like new again!

The process begins with a thorough polish of the necklace to remove all scratches and bring the surface back to its original condition. The necklace is then cleaned using an electrolytic-cleaning solution to remove all dirt and debris from the necklace. After this procedure all impurities are removed. The last step of the procedure is a rhodium bath, which applies a new bright, white finish to the necklace and makes it look like brand new!

The entire procedure is done on site, using state of the art equipment!

Visit our Kitchener-Waterloo location to consult with our goldsmith!

Back to Top

Watch Service & Repairs

Are you having any issues with your watch? Does it not fit right? Does it need its batteries replaced? 

At Arman’s Jewellers, we provide a number of on-the-spot services that can be performed while you wait, including watch battery replacement and watch bracelet repairs or sizing. We also provide complete servicing such as pocket watch repairs and watch restoration.

For more information, contact us or visit our Kitchener-Waterloo jewellery store!

Back to Top

Pearl Jewellery

Have you lost any pearls from your necklace or bracelet? Did the strings break?

Arman’s Jewellery Repairs can re-string and replace the pearls on your bracelet or necklace to return them to their original condition.

For more information, contact us or visit our Kitchener-Waterloo store to discuss with our goldsmith!

Back to Top